Thursday, January 22, 2015

REPOST: Let there be light

The Economist runs a special report on how the major drivers of the energy market are going in the right direction, thanks to better technology, improved efficiency, and effective management of supply.

A CAREFUL OBSERVER might note the chunky double glazing on the elegant windows and the heat pump whirring outside the basement entrance. From the outside the five-storey house in London’s posh Notting Hill district looks like any other. Inside, though, it is full of new technologies that aim to make it a net exporter of power. They exemplify many of the shifts now under way that are making energy cleaner, more plentiful, cheaper to store, easier to distribute and capable of being used more intelligently. The house in Notting Hill is a one-off, paid for by its green multimillionaire owner. But the benefits of recent innovations can be reaped by everybody.

That makes a welcome change from the two issues that have dominated the debate about energy in the past few decades: scarcity and concerns about the environment. Modern life is based on the ubiquitous use of fossil fuels, all of which have big disadvantages. Coal, the cheapest and most abundant, has been the dirtiest, contributing to rising emissions. Oil supplies have been vulnerable to geopolitical shocks and price collusion by producers. Natural gas has mostly come by pipeline—and often with serious political baggage, as in the case of Europe’s dependence on Russia. Nuclear power is beset by political troubles, heightened by public alarm after the accident at Japan’s Fukushima power station in 2011. Renewables such as wind and solar—beneficiaries of lavish subsidies—have so far played a marginal role. The main worries were whether enough energy would be available for power generation, transport, heating, cooling and industry; and if so, whether it would cook the planet.

Now new factors are in play. Technological change has broken the power of the Organisation of the Petroleum Exporting Countries (OPEC) to keep the oil price high. Hydraulic fracturing (“fracking”) and horizontal drilling have turned America into a big oil producer, with 4m barrels a day coming from sources which used to be deemed “unconventional”. The boom in producing oil and gas from shale has yet to spread to other countries. America enjoys some big advantages, such as open spaces, accommodating laws, a well-developed supply chain and abundant finance for risky projects. So far it has refrained from exporting its crude oil or natural gas, but exports of liquefied natural gas (LNG) will start this year. Increased trade in LNG will create a more global gas market and greater resilience of supply, undermining Russia’s pipeline monopoly in Europe. America is already exporting lightly refined oil.

An increase in supply, a surprising resilience in production in troubled places such as Iraq and Libya, and the determination of Saudi Arabia and its Gulf allies not to sacrifice market share in the face of falling demand have led to a spectacular plunge in the oil price, which has fallen by half from its 2014 high. This has dealt a final blow to the notion of “peak oil”. There is no shortage of hydrocarbons in the Earth’s crust, and no sign that mankind is about to reach “peak technology” for extracting them. But the fall has created turmoil in financial markets as energy companies lay off workers and cut or delay investment projects.

Image Source: economist.com

The implications are more complicated than the headlines suggest. For a start, low prices do not instantly cause supply curbs or make investment dry up. Even costly projects do not stop pumping when the oil price falls. Fracking is a small-scale business. New projects can be halted quickly and restarted when the price picks up. American frackers are now the world’s swing producers, reacting to price fluctuations in a way that was once the prerogative of the Saudis. On a 15- to 25-year time horizon, today’s slide in the oil price needs to be set against the likely long-term trend. Futures markets are betting that the oil price will be back to $90 per barrel in the early 2020s.

For now, though, low oil prices put money in consumers’ pockets and give a bit of breathing space to governments, making it easier to cut fossil-fuel subsidies (and perhaps even tax carbon emissions). In 2013 some $550 billion was spent on subsidising fossil fuels, a policy of extraordinary wrongheadedness that favours the rich, distorts economies and aggravates pollution.

A bigger question on many minds is the effect of rock-bottom oil prices on the shift towards low-carbon energy. Solar, wind and other renewables have recently benefited from unprecedented investments: an average of $260 billion a year worldwide over the past five years. Long, and wrongly, decried as mere boondoggles, they have begun to show real commercial promise in places as diverse as India, Hawaii, and parts of Africa where the climate is favourable, costs are low and other sources of power are expensive. Renewables capacity is rising even as subsidies are falling. China, for example, has already installed nearly half the 200 gigawatts (GW) of wind power it had been planning for 2020, so it is sharply cutting back the subsidies it introduced in 2009.

But the relationship is not always straightforward. Renewable electricity mainly competes with gas- and coal-fired power stations, not with oil. In North America, low oil prices may, paradoxically, lead to higher natural gas prices. Less fracking means there will be less of the associated gas that is produced along with shale oil. More broadly, much of the support for renewables has been political, and there is little sign that this is changing. Worries about climate change continue to ensure that clean energy enjoys strong political support in many developed countries. Whereas shares in oil companies have in recent months fallen along with the price, the S&P Global Clean Energy Index, which covers the industry’s 30 biggest listed companies, has barely budged.

The economics—and particularly the whopping subsidies of the past decade paid out in countries such as Germany and Britain—remain contested. Solar and wind are intermittent, so they are truly useful only if the power they produce can be stored; otherwise they need back-up capacity, typically from fossil-fuel sources. Dieter Helm, an energy expert at Oxford University, says that subsidies for primitive green technology, such as the current generation of solar panels, have been a “colossal mistake”. It would have been much better, he argues, to invest in proven technologies such as electrical interconnectors (linking Britain and Norway, for example) and support research into new kinds of solar power, such as films that can be applied to any outside surface and technologies that use a wider chunk of the spectrum.

Bits of the green-energy world are wilting under the impact of low oil prices. Some biofuels have become less attractive. The same is true for electric cars, which currently make up less than 1% of America’s light-vehicle fleet. Bloomberg New Energy Finance reckons that with petrol at $3.34 a gallon ($0.87 per litre), that share could rise to 9% by 2020. With petrol at $2.09, it would go up to just 6%. At the same time countries and companies thinking of switching from oil-fired power generation to renewables may reconsider. Saudi Arabia, for example, was planning to invest $110 billion in 41 GW of solar capacity by 2032, but may now want to think again.

Take the long view

Yet the long-term trend is clear. In particular solar electricity, and ways of storing it, are getting ever cheaper and better, as this special report will show. Sanford C. Bernstein, a research firm, sees “global energy deflation” ahead. Most of the investment decisions in the fossil-fuel industry are taken a decade or two ahead. The International Energy Agency (IEA), an intergovernmental organisation often criticised for its focus on fossil fuels, says the world will need to stump up about $23 trillion over the next 20 years to finance continued fossil-fuel extraction, but the prospect of much cheaper solar power and storage capabiliy may put investors off. The story may be not so much what falling oil prices mean for clean energy than what the prospect of clean energy will mean for the oil price.

Old energy industries are changing too. Gas will become more abundant and easier to trade. Even coal, the most widely used and so far most polluting fossil fuel, is not inherently dirty. It does not need to be burned but can be cooked instead to produce methane, which can then be used as a fuel or in petrochemicals. Modern coal-fired plants, though pricey, are far cleaner than the belching monsters of the past. The heat they produce is used, not wasted as in many traditional power plants. The emissions are scrubbed of the oxides (of nitrogen and sulphur) that eat away at bodies and buildings. In some projects—albeit for now on a tiny scale—the CO{-2} is also captured for storage or use. Such improvements could make coal as relatively clean as other fossil fuels, though they make commercial sense only if the rules are tilted in their favour. But if the price of such techniques comes down and the cost of pollution goes up, clean coal could be competitive.

Nuclear power, in theory, is a source of cheap, dependable, constant electricity. In practice it is too costly for private investors to back without government guarantees, and its perceived danger makes it unpopular in some European countries and in Japan. One of several flaws in Germany’s Energiewende—supposedly a big shift to green technology—was the hurried abandonment of the country’s nuclear capacity. Besides, many of the world’s existing nuclear power stations will have to close in the coming two decades. Barring a political shift or a technological breakthrough—perhaps in small, mass-produced nuclear plants—it is hard to see the fortunes of nuclear energy reviving.

Demand for energy is likely to hold up for some time yet, mainly thanks to rapid economic growth in emerging economies. The IEA predicts that over the next 25 years it will rise by 37%. Yet increasing efficiency in energy use and changes in behaviour have meant that the hitherto well-established link between economic growth and energy use is weakening.

More for less

America’s economy, for example, has grown by around 9% since 2007, whereas demand for finished petroleum products has dropped by nearly 11%. In Germany household consumption of electricity is now lower than it was in 1990. Global demand used to rise by 2% a year, but the rate is slowing. Even emissions in China, the world’s largest and dirtiest energy consumer, may peak by 2030, thanks to huge investments in new clean-coal power generation, nuclear and renewable energy and long-distance transmission lines. Simon Daniel, an energy expert, sees two conflicting trends: on one hand greater efficiency, local production and storage, on the other increased consumption from the billions of new devices that will be hooked up to the “internet of things”.

On current form the emissions from oil, gas and coal would, on most models, make it impossible to keep the rise in global temperatures below 2˚C by the year 2100; the most likely outcome would be a 4˚C rise, which has prompted calls for most of the world’s remaining hydrocarbons to be left in the ground. The IEA estimates the investment needed for “decarbonising” future electricity production alone at an astounding $44 trillion. The best hope of avoiding that much warming is a huge increase in energy efficiency.

One big component of that task will be to adapt the existing stock of buildings. Amory Lovins, one of the foremost prophets of energy efficiency and founder of Rocky Mountain Institute, a think-tank and consultancy based in Colorado, believes that the scope for improvement remains huge. He has long preached that proper building design and energy storage can eliminate the need for air-conditioning and space heating in most climates, and illustrates this by growing bananas in his own house, on a windswept mountainside in Colorado where winter temperatures can drop to –44˚C. Eliminating the heating system for his house, he says, saved more money than he spent on insulation and fancy windows. His optimism is slowly winning converts.

Despite all the obstacles, pretty much all the technology the world needs for a clean, green future is already available. As A.T. Kearney, a consultancy, notes in a recent report for the World Energy Council, a think-tank: “Energy-efficiency potentials combined with renewable-energy sources and shale-gas potentials provide an abundance of energy that can be made accessible with currently available technologies.”

Image Source: economist.com

Transmission costs for electricity are plunging, thanks to solid-state technology, which makes efficient direct-current circuitry safer and more flexible. Power grids which were previously isolated can now be connected: one audacious plan involves a 700-mile, £4 billion ($6 billion) link between Britain and Iceland. Such projects are costly up front, but offer big long-term savings from cheaper power, better storage and increased resilience.

More effective management of supply and demand also offers scope for big savings, as this special report will show. Sensors can now collect vast amounts of data about energy use, and computer power and algorithms can crunch that information to offer incentives to customers to curb consumption at peak times and increase it when demand is low. At the same time business models which can turn a profit from thrifty energy use are developing, and capital markets are waking up to their potential.

That splendidly energy-efficient house in Notting Hill demonstrates just how much can be done right now, even if it does not yet come cheap. Its owner, Michael Liebreich, founded a business called New Energy Finance, which he sold to Bloomberg, a financial-information company, in 2009. He has spent tens of thousands of pounds on making his home thrifty, resilient and productive.

The house is no stranger to energy revolutions. In 1865 its original builders installed a state-of-the-art delivery and storage system: a coal hole in the pavement, sealed by a handsome cast-iron hatch. Gas and then electric lighting, central heating and hot water came later. But the revolution under its current owner is the biggest yet. Despite the airtight insulation the rooms feel airy. Specially designed chimney cowls suck stale, moist air from the house while a heat exchanger keeps the thermal energy indoors.

The house now requires remarkably little input of energy. Gas and electricity bills for a dwelling of this size would normally run to at least £3,500 ($5,500) a year, but once everything is in place the owner expects not only to spend nothing but to receive a net payment for the electricity he produces. On the roof is a large array of solar panels which deliver two kilowatts (kW) of electricity on sunny days. Another source of power is a 1.5kW fuel cell in the former coal bunker. It runs on gas, with over 80% efficiency—far more than a conventional power station or boiler. The electricity from these two sources powers the household’s (ultra-frugal) domestic appliances and its low-energy lighting, as well as a heat pump (a refrigerator in reverse) that provides underfloor heating. A water tank stores surplus heat. Spare electricity is fed back into the grid.

Mr Liebreich does not claim that his house is easily copied, but he insists that through “thinning mist” the future is visible. “The only things that are inherently costly are the thermodynamic process and resource depletion—for everything else costs have come down, are coming down and will come down in future,” he says. In short, most of the forces changing the energy market are pushing in the right direction.

Sureway International is Canada’s one-stop source for lighting, electrical, and industrial products. The company combines its excellent inventory of affordable, high-quality products with unparalleled service commitment, making the retailer the ideal choice for electrical supplies for a wide range of applications. Browse through this website to learn more about the leading electrical supplies distributor.

Tuesday, December 16, 2014

REPOST: Benefits of Using LED Lights at Christmas

The use of eco-friendly lighting and other fixtures sets smart households apart from the rest. Let this article shed light on the many benefits of switching to LED holiday lights this Christmas.

LED lights are fast replacing incandescent bulbs due to the wide array of benefits they offer the consumer in terms of electricity usage, durability, safety, versatility, and environmental footprint. More and more, LED Christmas lights are likewise becoming a much more popular choice over the strings of incandescent bulbs of Christmases past, which were encased in painted glass, burned hot, broke easily, and with one broken or burnt-out bulb could cause the entire string to fail to light up. Here are some of the benefits of choosing LED lights over incandescent this Christmas season.

 Image source: Wikipedia.org
  1. Less electricity used: LED lights used in Christmas displays demand far less electricity in order to operate than incandescent lights. Not only does this make them a good choice for families who are consciously trying to reduce their energy use, but it can also mean less expensive utility bills in December.
  2.  Safety features: One of the biggest problems with incandescent Christmas lights has been the danger they pose in terms of inadvertently causing Christmas tree fires. Incandescent bulbs burn hot, which can be trouble when they’re placed in a Christmas tree, particularly one that’s begun to dry out. LED lights, on the other hand, are encased in an epoxy plastic that remains cool to the touch and thus don’t run the risk of starting a fire.


    Image source: Extremetech.com

  3. Durability: LED lights are durable on multiple levels. They don’t burn hot, which makes them longer-lasting in terms of bulb life. They’re also constructed to be much more sturdy than incandescent bulbs, which means they’re less likely to break when stepped on or stored improperly. Finally, LED Christmas lights will still operate even if one bulb goes out. This can cut down substantially on the need to replace seemingly “broken” strands.
  4. Versatility: LED lights are not affected by moisture, changes in temperature, or extreme cold. This makes them extremely versatile, as they can be used inside and out. Thus, indoor and outdoor lights no longer have to be differentiated, making decorating much easier.

    Image source: Laughingsquid.com

  5. Environmental footprint: For all the reasons outlined above and more, LED lights leave less of an environmental footprint than their incandescent counterparts. Their reduced electricity needs cut down on energy usage and actually help households save electricity and money. And their durability ensures that less waste is produced. After all, when Christmas lights don’t need to be replaced as often, then fewer light strands ultimately find their way to the landfills.
Sureway International, makers of energy-efficient lighting and electrical products, wishes you a warm and happy yuletide season. Visit this website to know more about its safe and energy-eficient range of lighting fixtures that are perfect for the holidays.

Wednesday, November 26, 2014

Occupational noise: Health and safety in the workplace

The celebration of the Hearing Awareness Week (August 24-30, 2014) highlighted the adverse effects of exposure to dangerous noise levels in the construction industry. Hearing, considered a major tool for the trade, is lost or decreased as workers are continually exposed to hazards to it.

Image Source: hsimagazine.com

Studies show that many constructions activities produce sound louder than 90 decibels (dB), to which maximum exposure should be two hours or less. As an Infolink.com article illustrates, the allowable exposure time is equivalent to using the hand drill for two hours, or a jackhammer for about two minutes. Going beyond this limit can cause the tiny hair cells set deep inside the ear to be damaged. Since these cells cannot be replaced or repaired, hearing can be lost forever.

Image Source: pages.drexel.edu

A hierarchy of controls has been established in an attempt to ensure the safety and security of workers in such hazardous conditions. This involves removing or replacing the hazard, isolating people from the hazard, or changing the way they work. Lastly, on the workers’ side, the use of personal protective equipment (PPE) is highly recommended.

Image Source: cdc.gov

PPEs such as hearing protection devices (HDPs) come in various makes and models, and produce different effects as well. These can be ear plugs, ear muffs, and even ear canal caps. Generally, comfort of use is the major consideration. Preference is based on compatibility, ease of use (as in not getting in the way of using other PPEs), and sometimes, emerging environmental factors like temperature of the surrounding.

All in all, healthy hearing begins with wearing appropriate ear protection, especially with increased exposure to occupational noise, and seeking professional advice for any nascent hearing problem.


Sureway International offers Canada-wide shipment for your industrial needs, including hearing protection devices. Visit this website to explore the company’s inventory.

Wednesday, September 17, 2014

REPOST: DIY Supply Spotlight: 12 Tools Every New Homeowner Should Have

Completing home improvement projects and personalizing spaces around the house can be achieved with the help of hand tools. This article on Apartment Therapy lists some of the most essential tools for homeowners.
Image Source: apartmenttherapy.com
Having some basic tools handy is important as you settle into your home. They not only equip you to care for your house, but also help you personalize your space. Here is a list of the very basics that you'll be glad to have around! 
Take pride in your tool box and get familiar with each tool. At the very least, it will be of great help when you are trying to accomplish some much needed home projects. At the most, you will be motivated and inspired to do more things around the house, maybe take up a DIY project or two!
Image Source: apartmenttherapy.com
1. Toolbox: It's extremely helpful to organize your tools in a way that maximizes their use. Plus, having a designated place for your tools will increase the likelihood that you will use them more. Flambeau Zerust Brute Tool Box, $15 
2. Hammer: It pays to invest in a good quality hammer with a anti-vibration rubber grip with a steel handle. Getting one with a rip claw will be useful for demolition. Stanley Framing Hammer, $41 
3. Screwdriver set: Screwdriver are used for a variety of things, so make sure you get a mixed set with a range of sizes. Lutz 15-in-1 Ratchet Screwdriver, $15 
4. Tape Measure: Whether you are building furniture, or thinking about bringing new furniture in, tape measures are your best friend. Tape measures are especially important for new homeowners planning out their new space. Make sure to get a good-quality, easy-locking one that is at least 3/4-inches wide.Stanley Measuring Tape, $10. 
5. Adjustable wrench: You will use a wrench to tighten and assemble all sorts of nuts and bolts, especially plumbing fixtures. Pittsburg Adjustable Wrench, $5 
6. Pliers: Use these to straighten bent power-cord plugs, replace old shower heads, or any project that requires you to cut, bend or grip wire. Stanley Plier Set,$12 
7. Utility knife or box cutter: I'm always surprised by how many times I end up reaching for our utility knife. It comes in handy for cutting all sorts of things that would be too difficult with a pair of scissors. Klever X-Change Safety Box Cutter, $11 
8. Putty knife: A putty knife is useful for scraping off wallpaper or paint or spreading spackle over small holes in the walls. 5-in-1 Painter’s Tool, $7. 
9. Stud Finder: I didn't get one of these until we bought a house, but it has come in so handy since, especially for hanging heavy things. Hanson Stud Finder, $10 
10. Power Drill: This is the most expensive thing on the list, but it is extremely worthwhile for a variety of practical tasks like putting up shelves, or for DIY projects like giving your coffee table some new legs. Dewalt 18-Volt Drill/Driver Kit, $99. 
11. Handsaw: This was one of those tools that I didn't think we needed, until we did, and then nothing but a handsaw would do. Our first use of the handsaw involved cutting the knobs off the trunk of our Christmas tree so that it would fit into the stand. Sharp Tooth Handsaw, $11 
12. Staple Gun: I am hoping to teach myself how to do some basic upholstering in the near future, and this staple gun is going to be a must. Stanley Staple Gun, $24 
Tool tip: As you get comfortable with the tools and take up more projects, you can slowly accumulate more tools as you go. To start, getting all of these basic essentials should cost you around $250. Be wary of buying the cheapest version of each item, unless you know that it is of good quality. These tools are meant to last you a long time, and you can think of them as the foundation for your growing tool set!

Sureway International is a leading distributor of hand tools, safety products, and industrial supplies. Check this website to view its wide selection of home renovation products.

Monday, July 14, 2014

Help employees shine in the workplace: Improve productivity with good lighting

The overall success of a company relies heavily on the effectiveness of its employees. This is why companies invest in programs that boost employee morale. But many overlook one aspect of working conditions that helps improve worker performance—indoor lighting.

http://www.tlc.com/tv-shows/kate-plus-8/photos/energy-efficient-indoor-lighting-pictures.htm
Image Source: tlc.com

In an effort to cut down on operating costs, management might make the mistake of foregoing proper lighting, and this can turn out to be a costly decision in the long run. Employees that can comfortably see what they're doing work faster and more accurately. Good lighting prevents delays and minimizes errors.

http://www.gelighting.com/LightingWeb/emea/products/indoor-lighting/
Image Source: gelighting.com

Likewise, poor lighting makes it harder for people to focus. Straining to see sometimes also results in poor posture, which leads to overall fatigue and discomfort. There have been cases and studies that demonstrate the effect of lighting to employees' overall well-being. Offices with comfortable lights show increased productivity and lessened absenteeism among employees.

http://designsenselighting.com/beneficial-low-voltage-indoor-lighting-brisbane/low-voltage-indoor-lighting-brisbane/

Management should also consider the visual requirements of employees to determine the right level of brightness and contrast. For example, workers with jobs that require sharp attention to detail, like tailors and seamstresses, will benefit from bright white light. Lighting specialists like Sureway International stock different types of lights to meet different workplace requirements.

In conclusion, for a company to achieve optimal productivity, management must assess and understand how the offices' lighting design contributes to the welfare of workers.

Canadian company Sureway International offers a full line of lighting and electrical products for the home and office. To learn how the company can furnish lights for your workplace, visit its website.

Tuesday, June 24, 2014

REPOST: A guide to light bulbs: How to save money, environment

Light bulbs vary greatly in prices and in how much energy they use. The energy-efficient ones often cost more than those that consume more electricity, although the former saves money in the long run. To help you choose, the Christian Science Monitor provides the following guide to energy-efficient light bulbs

(A man holds up a light bulb. Energy-efficient light bulbs like CFLs and LEDs have higher initial costs, but can save help save money in the long run. Photo by Jae C. Hong/AP/File) Image Source: csmonitor.com


Buying a light bulb used to be easy. You headed to the store, chose bulbs with your desired wattage, handed over a few bucks, and were on your way. Today, navigating the light bulb section is much harder, thanks to new energy-efficient types of light bulbs like CFLs and LEDs that come with a much higher price tag, as well as a staggering array of options.

To help with your decisions, we looked at the basic terms and light bulb types affiliated with this new generation of options, and compared them to the ones consumers are traditionally used to. Although the initial costs are higher, new forms of light bulbs are not only better for the environment, but they'll also save you money in the long run — if you choose correctly for your needs.

Know these terms: Watts and lumens

Simply speaking, watts are the amount of electricity a bulb uses to produce light. The less wattage, the less energy used. Traditionally, they were the deciding factor for purchase, and you had four choices – 40, 60, 75, or 100. (More on those numbers later.)

Today, it's all about the lumens, which measure the amount of light emitted from a bulb. More lumens equal brighter light. To replace standard wattage light bulbs based on lumens, use the following general rules:

  • 40 watts: Look for at least 450 lumens
  • 60 watts: Look for at least 800 lumens
  • 75 watts: Look for at least 1,100 lumens
  • 100 watts: Look for at least 1,600 lumens

Types of light bulbs

Incandescent light bulbs: The cheapest option

If you're a fan of the standard 40, 60, 75, and/or 100-watt bulb, you might want to stock up. As part of the Energy Independence and Security Act of 2007, they were phased out in favor of more energy-efficient models. While you can still find them in some stores — or buy them by the case on eBay — they're no longer being produced.

The new incandescents are more energy-efficient, but still pale in comparison to the life span of CFLs and LEDs. A typical bulb will last for about 1,000 hours. Still, if you're looking for the lowest price tag on light bulbs, incandescent bulbs are your best bet at around $1 to $2 each.

CFL bulbs: Mid-level pricing, moderate energy savings

Compact fluorescent light (CFL) bulbs have been around for a while, and they're best known for their spiral design. They typically last for about 10,000 hours, and use much less energy than incandescents – about 75 percent less. Cost-wise, they'll cost you more than incandescent bulbs, as they start at around $4 each. According to the US Department of Energy, you'll recoup that cost in energy savings within nine months.

CFLs don't brighten as quickly as incandescent or LED bulbs, so they aren't great choices for entryways, or any place where you need immediate light. They also don't work well in the cold, so for outdoor use in cold climates, incandescents or LEDs would be a better bet. And CFLs also contain small amounts of mercury, so you shouldn't throw them in the trash. Both Home Depot and Lowe's offer CFL recycling programs.

Image Source: surelight.ca


LED light bulbs: Most expensive, highest energy savings

Light emitting diode (LED) bulbs use even less energy than CFLs, and they last longer: up to 50,000 hours. Unlike CFLs, they brighten instantly, even in cold temperatures. Using LEDs can help you save up to 80 percent in energy costs per year.

LEDs come with a heftier price tag than CFLs or incandescents – they start at around $10 each. If you have a light fixture you barely use, you might want to opt for a CFL or incandescent instead, as you may not recoup the cost in energy savings.

Light bulb features: Choosing the right bulb for your needs

Energy-efficient light bulbs come in different sizes, shapes, and colors, and it can be difficult to determine which will work best in your fixtures. When all else fails, bring your old light bulb to the store and ask for help, but get acquainted with these features first.

Lighting facts label

All new light bulbs are now required to have this, which lists lumens, watts, lifespan, light appearance, and yearly savings. This label makes it easy to compare different models and see which type meets your needs and which will save you the most money.

Dimmers and 3-way fixtures

Standard CFLs often don't work in dimmers, and some LEDs don't, either. All three types, in fact, offer bulbs specifically for those purposes, so look for that designation on the package. Also look for designations for outdoor lighting.

Colors

If you want lighting that resembles the warm color of standard incandescent bulbs, look for something on the "warm" end of the lighting facts label, or about 2,500 Kelvin. The higher you go, the more white the light will be. 5,000K and up mimics natural daylight.

Shapes and sizes

Each package has a letter and number code on it. The letter is the shape, and will stand for standard (A), globe (G), bullet (B), candle (C), flare (F), reflector (R), sign (S), or tubular (T). The size numbers reflect the diameter of the bulb at its widest point.

ENERGY STAR

ENERGY STAR is a labeling program by the US Environmental Protection Agency and the US Department of Energy that identifies energy-efficient products and buildings. In order for products to receive the ENERGY STAR label, they must meet an established set of criteria for efficiency. And if you buy ENERGY STAR-certified light bulbs, you may be able to receive special offers and rebates. Simply enter your zip code on the website and select the type of light bulbs you want to buy (as well as any other ENERGY STAR products you're interested in).

Image Source: energystar.gov


The bottom line: Consider savings now and savings later

If you're looking for instant savings, energy-efficient incandescents are the way to go. If you're looking long-term cost benefits, CFLs and LEDs will save you more money in the long run.

What types of light bulbs are you using in your home? Have you noticed any savings from energy-efficient models?


Sureway International offers a wide range of lighting products for home and business use. Get more tips on lighting and energy conservation on this blog.

Tuesday, May 13, 2014

REPOST: Should I buy LED or CFL light bulbs?

According to Treehuggers' Michael Graham Richard, the answer varies but lies on when the bulbs are purchased. While the light-emitting diode bulbs of today now match compact fluorescent bulbs, they may very well outpace them in the future.


Image source: mnn.com

We already know that incandescent light-bulbs are on the way out because they're incredibly wasteful, being better at producing heat than light. And most people know that LEDs have started replacing compact fluorescents (CFLs) and should become the next gold standard for producing light. But are LED bulbs truly better than CFLs? If so, by how much? To really know, it's not enough to just look at lumens-per-watt efficiency; you have to do a full life-cycle analysis to truly figure out which one comes out on top when everything is taken into account — including manufacturing, usage, transportation, how many bulbs are used over time for those that don't last as long, etc.

That's what the U.S. Department of Energy did in this very thorough analysis, and the agency's findings are interesting.

Image source: mnn.com

“The average life-cycle energy consumption of LED lamps and CFLs are similar, at approximately 3,900 MJ per 20 million lumen-hours. This is about one quarter of the incandescent lamp energy consumption — 15,100 MJ per functional unit. By 2015, if LED lamps meet their performance targets, their life-cycle energy is expected to decrease by approximately one half. In addition, based on this analysis, the 'use' phase of incandescent, compact fluorescent and LED lamps is the most energy intensive phase, on accounting for approximately 90 percent of total life-cycle energy. This is followed by the manufacturing and transport phases, respectively with transport representing less than one percent of life-cycle energy for all lamp types.”

So CFLs and LEDs are about the same on an LCA basis right now, though there are other reasons why one might want to pick LEDs. For example, LEDs are less fragile than CFLs, and they don't release mercury when broken, they last about three times longer, and they turn on more quickly.

Image source: mnn.com

But the real leap forward will come in about two years when next-generation LEDs come to market. We've written about one by Philips that gets 200 lumens/watt. These should be about twice as good as current LEDs and CFLs, allowing LEDs to finally declare a decisive victory over fluorescents.

For a broad selection of high-quality LED and CFL bulbs, along with other lighting and electrical fixtures, visit the Sureway International website.